replaced my mirror with a new glass... and the wire on the connector was broken as well, took me 1/2 an hour to find the right size spade connector!! but its working well its heating up and moving left and right, and up and down, BUT seems to move easy when you move it with your hands (maybe the little plastic cogs are wearing out, but at least I have a drivers side mirror (£22 with P&P) cheaper than a Land Rover OME part but just as good (from ebay) and got it the next day (its a britpart)
 
Last edited:
Dopey said:
replaced my mirror with a new glass... and the wire on the connector was broken as well, took me 1/2 an hour to find the right size spade connector!! but its working well no heating up and moving left and right, and up and down, BUT seems to move easy when you move it with your hands (maybe the little plastic cogs are wearing out, but at least I have a drivers side mirror (£22 with P&P) cheaper than a Land Rover OME part but just as good (from ebay) and got it the next day (its a britpart)
Click to expand...

Think it maybe lacking electricery. You're going to get your hand wet if it's raining selecting reverse dip. :D:D
 
Datatek said:
If the ABS sensors work, why change them?
The height sensors is good preventive maintenance if you have the cash:)
Click to expand...

its all to do with the ABS warning light coming on. one of the suppliers at work used to work for RR in Solihull, said its 99.9% the sensors. and going by the nanocom, thought it better to do them all at the same time.

should give me a few years trouble free once all done.

EDIT!!!!!!

forgot, its a Range Rover!:der::der::der:
 
Air bags done! Thanks Keith, how to was spot on! Some unknown reason, I had continental bags on the back . Also changed the brake sphere. Big difference! Just the sensors and abs to do now. Would of got them done but the fitters wanted to go home. Play again tomorrow night. :D
 
After 3 months of not running I got to drive it for the first time today. HURRAH except this in turn cost me 800 quid. 4 new General Grabbers A/T in 255/55/18, New heavy duty battery and a tank full of gogo. It better not ruddy break again for a while.
 
Received a box of new bits today.. panhard rod bushes, full bush set for the front radius arms and a set of heavy duty springs :D

Fitted the bushes to the Panhard rod ready for the MOT next week :eek:

The rest will have to wait for now..
 
strange grinding noise from rear wheel thought is was a stone trapped in the disk shield turned out to be a spring had rusted away and the handbrake shoes were loose.
fitted new shoes and replacement spring kit £28 all in.
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
2K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
540
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
717
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
801
Grrrrrr
Grrrrrr