If it is that, ring these guys up they will even make the battery for you to make it fit, and the biggest you can get, just askI took her for a drive to charge up battery , go to shop and exercise dog.
View attachment 229963
I had a m8 he was a dwarf (he actually played an umpa lumpa in the original film Charlie and the chocolate factory) he got stopped by the cops going through the Heathrow tunnel in an electric car at like 3mph, he was going for a job interview
Thats him on the left
Yea how did you know?George?
any reason I can't pull the relay for the passenger side then connect 12v to pin 85? that would energise the relay and send power to drivers side only. would let me try with engine off and i could measure current to see whats going onI take back what i said earlier! Heated screen most definitely didn't work on drivers side last night
Yea he did, sad he was a real nice guy, we were good m8s, the strange thing is, I did the new "Willy Wonka and the Chocolate factory" film as wellIMDB.
Looks like he died about 20 years ago.
Can someone help me here? This looks like a fake site to me, I went as far as about to pay by PayPal, and it wanted it in $$ and not ££ so I started to look carefully, then the email won't work looked online and there's no other mention of it, and the thing that I am buying is like £90 cheaper.... and I suspect its in chin anyway, so I will have to pay import tax even if it is right.... your thoughts on it please
https://www.hazatop.com/icarsoft-va...agnostic-tool-audi-vw-seat-skoda-p-554853.htm
I would be inclined to put a thin wire in position 85 in relays 4 and 5 so you can see the progression of power.with your test lamp .5 should power up when the ignition is on, this feeds the passenger side screen and relay 4 so your other wire should become live.If it does then remove relay and check resistance between 85 and earth this should check the circuit through the screen.If no live.remove fuse box tilt it up ,protecting the 3 live cables that feed the BECM,I rested it on a mat. Unplug the violet plug and check for continuity between 85 and the pin that feeds the purple light green wire..If no continuity then replace the relays switch the ignition on and with your test lamp see which pin becomes live. You may have to move the p/LG wire in the plug to the corresponding pin position.I had to do this as I found the fuse box had been changed for one of a different year. Easily done with a darning needle. Pm me if you need me to talk you through it.any reason I can't pull the relay for the passenger side then connect 12v to pin 85? that would energise the relay and send power to drivers side only. would let me try with engine off and i could measure current to see whats going on
I have a delphi clone diag if you need faults sorted.
Ok then, I wont buy one, but they are handy to have around though, when I get it, can you come round plug it in see what if anything comes up, or needs sorting out?
not an English site and no address anywhere on itCan someone help me here? This looks like a fake site to me, I went as far as about to pay by PayPal, and it wanted it in $$ and not ££ so I started to look carefully, then the email won't work looked online and there's no other mention of it, and the thing that I am buying is like £90 cheaper.... and I suspect its in chin anyway, so I will have to pay import tax even if it is right.... your thoughts on it please
https://www.hazatop.com/icarsoft-va...agnostic-tool-audi-vw-seat-skoda-p-554853.htm
That sounds a naughty, don't let @holidaychicken read it, he'll be around to,plug it in ,see if anything comes up and sorting it out.Ok then, I wont buy one, but they are handy to have around though, when I get it, can you come round plug it in see what if anything comes up, or needs sorting out?
Yea I did a trustpilot thing on it saying it was fakenot an English site and no address anywhere on it
Sensible walk awayYea I did a trustpilot thing on it saying it was fake
I'm sure @kurtjohnson10 had a brand new one a while ago,may be worth a pm or he may reply seeing I've tagged him.Spent the day staring at mine riding on its schrader valves while John Craddock continues to process my driver board order. Any ideas if all mail order parts stores are locked down? I ask because other stuff I've ordered have shipped but John Craddock is still processing. It's been 2 weeks now. Island 4x4 won't even come back with a shipping quote and Land Rover Malaysia wants £708 (advance order, payment in full upon placing the order and God knows if it'll arrive any faster), and that's quids.... pounds sterling, not Malaysian toilet paper money, for one.
What gives?
Anybody?