danchapman2k2
Well-Known Member
The bolts siezed but needs replacing i cant find size anywhere is it an M10 but how long
The bolts siezed but needs replacing i cant find size anywhere is it an M10 but how long
jamesmartin
Well-Known Member
see your other thread
1/2" unf x 6"
Very common bolt to seize in the chassis mount, you will need a long punch and a lot of heat and patients to get that bad boy out
Very common bolt to seize in the chassis mount, you will need a long punch and a lot of heat and patients to get that bad boy out
danchapman2k2
Well-Known Member
Long punch? As in Long enough to get through chassis
bushwwacker
Well-Known Member
M10 x 150 ish should do as a cheap punch along with a BFO 'ammer, WD40 and appn some heah.
Use decent stilly's to twist the bolt to help the penetrating fluid to work its way in.
danchapman2k2
Well-Known Member
The bolt won't even twist that's the problem
bushwwacker
Well-Known Member
M10 x 150 ish should do as a cheap punch along with a BFO 'ammer, WD40 and appn some heat.
Use decent stilly's to twist the bolt to help the penetrating fluid to work its way in.
bushwwacker
Well-Known Member
Listen to JM...
I just have and i've realised you don't seem to want to take decent, sensible advice...
danchapman2k2
Well-Known Member
Oh I'm taking advise don't get me wrong I was only asking here for bolt size
discool
Well-Known Member
danchapman2k2
Well-Known Member
That's if the rest are not Mullardlol
