Just written a list £6000 long and growing. I'm gonna have to wait a couple more Christmases before my landy gets her fill of modifications. :p
I'd sell up and buy one with half the stuff done to it, but I'm attached to my landy now, and could never let her go.
 
Spent too much already. Upgraded to td5 dash that cost a fair wack for the unit. Now baught an ashcroft locker and high outout arb compressor lol.
Can't spend any more!!! ;)
 
Just added up my xmas wish list and it's almost £600… might have to just pick a couple of bits then save up some pennies :eek:
 
Mine is getting a snowcowl and rad muff,

how is that for wishful thinking! but only while it stays white and not brown... LOL
 
Mine might be getting another defender as a doner to keep it company. Then I will pull it apart for parts....
 
Pauleh said:
I'm not sure what it's called but the stainless looking part I've circled. Where did you get that from? Mine's cracked and I'd love to replace it with something like that.

Thanks,
Paul
Click to expand...

Paul,

Are you just looking for a metal binnacle?

Defender & S111 Binnacle Mount do one, not cheap but very strong.

As for my truck, it wants a paint job, full service, refurbished R380 and a whole lot more but it will have to be happy with an Orange and a new split charge relay and wire from the alternator :).

John
 
Also bought the motor a clutch spring mod to reduce the heavy clutch action.

made it easier, PITA to fit, should not be surprised the spring was in a blue bag. Still an improvement on the old spring set up.

snow cowl fitted, rad muff fitted, ready for winter.

Cheers
 
Pauleh said:
That's spot on, thanks!
Click to expand...

why not manufacture your own? I took my binnacle, taped a couple of A4 pages together, made a pattern, got a piece of 2mm steel plate and 500ml of expensive paint, a couple of hours later I had a steel replacement which worked out to about R80 (converted that is less than 8 pounds)
 
wvanzyl said:
why not manufacture your own? I took my binnacle, taped a couple of A4 pages together, made a pattern, got a piece of 2mm steel plate and 500ml of expensive paint, a couple of hours later I had a steel replacement which worked out to about R80 (converted that is less than 8 pounds)
Click to expand...


Because it's cold and my shed is currently stuffed so full of garden furniture I can't get in there
 
You must log in or register to reply here.

Similar threads

L
Newcastle mech recommendation?
Replies
8
Views
440
neilp1
N
jimllshiftit
Any advice for novice welder about to stitch new rear cross member to 90 chassis?
Replies
3
Views
748
tottot
tottot
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
444
miktdish
miktdish
A
Buying my first ever Series 1
Replies
7
Views
949
saxavordian
saxavordian