O

oli1

New Member
Hi guys,

When swapping around Land Rover body panels from different ages you notice pretty much all mounting holes are left in place so that things like the old style door catches will fit on the pre-drilled holes on brand new tubs, below the new ones. That sort of thing.

But I can't figure out what the two large holes are for on the rear bulkhead, which are covered over with pressed ali panels, riveted down and smattered with sealant, like in the photo. They must have had a purpose at one point in time?

MiliBulkhead1.jpg


Any ideas?

Cheers!

Oli
 
Ok I know it's a hi cap bulkhead but they all have it.

To prove a point, notice behind the black up-rights the row of rivets that would normally attached to the wheel arches of the tub are still there, not doing anything, just filled in with rivets.. they try to make panels as universal as possible, which can be handy!
 
BMC cars used to have something similar to front and rear. It was for turning the car over on a pole during paint process.
 
or perhaps its so North Korea and Iran can build those chemical / nuclear extractor units with rubber gloves attached so you can mess around with nasty checmicals without getting killed?? Very 70's bond movies
 
They are to let the water out when it rains ;)

My mate has removed the hatches and fitted speakers facing forward in the holes with a wooden backbox to protect the speakers from all the crap he keeps in the back of his 90. You can drop a sheet of ply straight down from the top of the bulkhead and it gives enough room at the bottom for the speakers. If you're lining out your tub anyhow it seems a sensible place to fit speakers.
 
Shifty1962 said:
They are to let the water out when it rains ;)

My mate has removed the hatches and fitted speakers facing forward in the holes with a wooden backbox to protect the speakers from all the crap he keeps in the back of his 90. You can drop a sheet of ply straight down from the top of the bulkhead and it gives enough room at the bottom for the speakers. If you're lining out your tub anyhow it seems a sensible place to fit speakers.
Click to expand...

That's what I did with mine ;)
 
could be for military use, ffr landies have the extra batteries behind the bulkhead. could be to feed cables through.
 
Just think yerself lucky they're filled in. Won't be long before they rust through. :behindsofa:
 
You must log in or register to reply here.

Similar threads

dag019
Are all door latches equal?
Replies
2
Views
341
dag019
dag019
keefa
Chassis/bulkhead swap - Steering column too long ? Eh?
Replies
5
Views
951
Hicap phill
H
J
300 Tdi Engine back in, nearly - Story and at the end Questions
Replies
0
Views
717
jer_300Tdi_90
J
stumpyj
Bulkhead Vent replacement
Replies
15
Views
3K
stumpyj
stumpyj
Trench Rat
Series 2 What can I expect for value? What can I get for it?
2
Replies
22
Views
3K
Webley1991
W