2

200sx

Member

• Dec 6, 2020

• #1

Found this wire behind my dash, seems to plug into left side of column. It’s been cut and replaced with a red wire then goes into engine bay and doesn’t connect to anything?

Any ideas? Should I remove and connect the purple/black back together

I also have this greenish/blue wire shown in last two pictures in engine bay, again connected to nothing. Anyone had any ideas ? It’s not connected to the red/purple/black wires I’ve mentioned above, seperate issue

cheers guys

 

Attachments

• 
  B30AB4BE-9C0E-42CA-8975-3A34BBD71909.jpeg

  320 KB · Views: 95
• 
  E18AEA0C-CFC6-46EE-A2E6-3211FAAF0116.jpeg

  282.1 KB · Views: 100
• 
  8266518C-3A47-4F1C-BAD1-E5E8642BA8BD.jpeg

  330.2 KB · Views: 96
• 
  89A96836-B938-45EA-A6BA-A07672DF64FD.jpeg

  435.9 KB · Views: 92

Kev12

Well-Known Member

Full Member

• Dec 6, 2020

• #2

The green one goes to the sender next to radhose, its for the temp gauge.
Don't know about the other, on some years purple is horn I think

 

2

200sx

Member

• Dec 6, 2020

• #3

Brilliant cheers, I did think it looked perfect length for the temp gauge sender

 

Rougharse Racing

Well-Known Member

• Dec 7, 2020

• #4

Horn?

 

wireman

Well-Known Member

• Dec 7, 2020

• #5

I agree with both of the above, see here:

https://content.invisioncic.com/r226025/post-19862-0-31479600-1415573993_thumb.png

 

2

200sx

Member

• Dec 8, 2020

• #6

Seems correct, I’m guessing wires been cut and red wire ran straight to horn for MOT then horn removed.

where should the standard horn be as id like to return it to standard

 

tottot

Well-Known Member

• Dec 8, 2020

• #7

At the top O/S behind the grill, in front of rad on my 1990 90.