Car details first, P38 2.5 dse auto (BMW engine) x reg (2000)
Okay, so I posted a little while back in the International rescue section. Basically, whenever its wet outside (or I drive through a puddle) I have a problem selecting reverse or Park. (Picture attached should show issue).
Someone mentioned checking the xyz switch as it could have a poor connection. What are the do's and don'ts about checking this connection (I do not have a fault machine thingy to clear any faults that pop up) Im using my car daily to get to and from work on nights at the moment.
If it isnt a soggy xyz switch, what else can I check? As Im going to pop under the car later when Ive slept before going to work, to see what the crack is.
Any help whatsoever is massively appreciated
Okay, so I posted a little while back in the International rescue section. Basically, whenever its wet outside (or I drive through a puddle) I have a problem selecting reverse or Park. (Picture attached should show issue).
Someone mentioned checking the xyz switch as it could have a poor connection. What are the do's and don'ts about checking this connection (I do not have a fault machine thingy to clear any faults that pop up) Im using my car daily to get to and from work on nights at the moment.
If it isnt a soggy xyz switch, what else can I check? As Im going to pop under the car later when Ive slept before going to work, to see what the crack is.
Any help whatsoever is massively appreciated
