tex · Feb 8, 2010

my ronge rover that ive owned for 2 days

is knocking on the big end so i think ill get rid and get a disco insted.paid a grand will have to take a hit on it or break GUTTED

P38_Ireland · Feb 8, 2010

thats a kick in the knackers mate, sorry to hear the bad news

Irishrover · Feb 8, 2010

Why not drop the sump, remove a bearing cap and check the bearings and crank for wear/damage??.......like they used to do before the consumable replacement society was born

rewmer · Feb 8, 2010

Irishrover said:
Why not drop the sump, remove a bearing cap and check the bearings and crank for wear/damage??.......like they used to do before the consumable replacement society was born

Now there's some top advice. An hour with some spanners and you will know for sure.

gavbriggs · Feb 8, 2010

you can replace the shells on these from the bottom, bit fidly but its doable.

Irishrover · Feb 8, 2010

And cheaper than a new lump.

:behindsofa:

everlatesparky · Feb 8, 2010

You fancying a play with a real engine Gav??

tex · Feb 8, 2010

thourght about that not really got the time just wanted to get in and drive the thing someone comeing tomorrow looking to buy £800 if im lucky taking a hit on it

Cavey_P38 · Feb 9, 2010

Let me know how you get on

i could be interested myself if you are set on selling it

is it auto or manual

tex · Feb 9, 2010

yep selling it £500 bring your own wheels or £800
des manual not sure about driving home?????

fett · Feb 9, 2010

Can you change main bearing and big end bearing with the engine in then?

tex · Feb 9, 2010

acording to some off the guys on here you can but ive just not the time or the heart

gemsdad · Feb 9, 2010

tex said:
acording to some off the guys on here you can but ive just not the time or the heart

kinell mate,surely you can drop the sump etc,have it all ready for one of those mobile mechs to come and change the bearings,it would be better than taking a big loss on it.

zzr1200 · Feb 9, 2010

everlatesparky said:
You fancying a play with a real engine Gav??

Proper size toys.......

tex · Feb 9, 2010

never thourght about that,no cash at mo will get some prices tomorrow

gemsdad · Feb 9, 2010

tex said:
never thourght about that,no cash at mo will get some prices tomorrow

send j the range a pm and see if his son wants the job.not saying he will but worth the ask.

gemsdad · Feb 9, 2010

zzr1200 said:
Proper size toys.......

wow that is a cool engine,wouldn't want to do a head gasket on one though.

zzr1200 · Feb 10, 2010

gemsdad said:
wow that is a cool engine,wouldn't want to do a head gasket on one though.

Or try and fit in a Series....

...

tex · Feb 10, 2010

seems like they are talking crank regrind as well as shellsthink its better to change engine

Irishrover · Feb 10, 2010

If the crank journals are clean and undamaged, changing the shells should be o.k.
Problem arises with the rear main bearing cap removal though because it carries the rear crank seal. It would be fairly safe to assume though that if the other mains are good, that should be the same.
Got nothing to loose though by dropping the sump, removing the big end caps together with the mains caps (One at a time, to prevent crank hanging) and seeing what state they are in. If they are fecked..at least you will know for certain !!!

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

New Member

Well-Known Member

New Member

Well-Known Member

New Member

NOT BOTHERED.

Well-Known Member

Attachments

New Member

NOT BOTHERED.

NOT BOTHERED.

Well-Known Member

New Member

Well-Known Member

Similar threads