hoopfish

Well-Known Member

• Aug 18, 2017

• #1

Good evening folks
So i need to weld the seat belt anchor points for its next MOT.
My first question is this, can i buy replacement anchor points to weld back on to the arch?
Second question is the boot pan, can this be spot welded or does it require a continues weld or could i even get away with pop riveting?
regards

Terry

 

L

lynall

Well-Known Member

Full Member

• Aug 18, 2017

• #2

Boot pan I would say whatever you can do neatly then cover all the joins in sikaflex/pu40 etc

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Aug 18, 2017

• #3

http://www.ebay.co.uk/itm/LAND-ROVE...H-REPAIR-SEAT-BELT-ANCHOR-POINT-/370560395809

https://www.rimmerbros.co.uk/Item--i-621112

 

Last edited: Aug 18, 2017

Mulcaster1

Well-Known Member

• Aug 18, 2017

• #4

Any welding must be either - the same as the manufacture or if a patch within 12" of a critical point - be continuos welded

 

hoopfish

Well-Known Member

• Aug 18, 2017

• #5

lynall said:

Boot pan I would say whatever you can do neatly then cover all the joins in sikaflex/pu40 etc

Click to expand...

That is what I was thinking!

 

hoopfish

Well-Known Member

• Aug 18, 2017

• #6

The Mad Hat Man said:

http://www.ebay.co.uk/itm/LAND-ROVE...H-REPAIR-SEAT-BELT-ANCHOR-POINT-/370560395809

https://www.rimmerbros.co.uk/Item--i-621112

Click to expand...

Thanks tmhm I did have a Google for it but couldn't find anything!

 

hoopfish

Well-Known Member

• Aug 18, 2017

• #7

Mulcaster1 said:

Any welding must be either - the same as the manufacture or if a patch within 12" of a critical point - be continuos welded

Click to expand...

Yeah that is what I understand as well for the anchor points etc. It's the boot pan that people appear to have different opinions on

 

L

lynall

Well-Known Member

Full Member

• Aug 18, 2017

• #8

I was reading a post on the series forum the other day where some of the owners had made their floor so it lifts out which must make repairs etc a doddle, obviously water intrusion not such an issue as it is with the disco!

 

Mulcaster1

Well-Known Member

• Aug 18, 2017

• #9

hoopfish said:

Yeah that is what I understand as well for the anchor points etc. It's the boot pan that people appear to have different opinions on

Click to expand...

Is the area effected within 12" of a load bearing point ? That will be the issue, or if the vehicle has a seep rate chassis, then 12" from a securing point. If not then a good standard repair is acceptable or may not even be required