gemsdad
NOT BOTHERED.
Its here
nice,when you selling it then.:jaw::bolt::lalala:
Dr_evil
Banned
marccleave
Active Member
No truck build then? 
:lol:
Looks and sounds great though! Just don't ruin it please.
Interested about that over bored engine. Just ran some numbers on over bore, with 10thou it would be ~3545.9cc, 20thou would be ~3566.1cc and 40 thou would be ~3606.8cc
Has it really been bored out that much? Blimey! Didn't realise the liners on a 3.5 block were that thick. I should look that up.
Got any more information on that, receipts? Sounds interesting.
Keep the pictures and videos coming please!
:lol:Looks and sounds great though! Just don't ruin it please.
Interested about that over bored engine. Just ran some numbers on over bore, with 10thou it would be ~3545.9cc, 20thou would be ~3566.1cc and 40 thou would be ~3606.8cc
Has it really been bored out that much? Blimey! Didn't realise the liners on a 3.5 block were that thick. I should look that up.
Got any more information on that, receipts? Sounds interesting.
Keep the pictures and videos coming please!
Dr_evil
Banned
No truck build then?
Looks and sounds great though! Just don't ruin it please.
Interested about that over bored engine. Just ran some numbers on over bore, with 10thou it would be ~3545.9cc, 20thou would be ~3566.1cc and 40 thou would be ~3606.8cc
Has it really been bored out that much? Blimey! Didn't realise the liners on a 3.5 block were that thick. I should look that up.
Got any more information on that, receipts? Sounds interesting.
Keep the pictures and videos coming please!
This kinda blew the budget on the truck build so things are on hold for now
I'll be fitting diff and steering guards to it for the laning trip later this month as well as a full straight through system on a larger bore but thats about it. May make up a truck cab for it too and it needs some seatbelts
other than that not got much planned for it other than drivability mods like soundproofing and a smaller wheelMaking sure anything I put on can be removed and is only bolt on so it doesn't damage it......if not I'd have bought or made weld on diff pans instead of expensive QT ones
He may have rounded the numbers up to 3.6 but thats what I was told, not had a look through the receipts though
marccleave
Active Member
Thought you had gone quiet on the truck build when you started posting about this...
Good, as long as you don't ruin it!!!
If they rounded the numbers up then its probably had a +20 thou pistons. Round 3566cc up and you get 3.6. That's a bit cheating though.
Good, as long as you don't ruin it!!!
If they rounded the numbers up then its probably had a +20 thou pistons. Round 3566cc up and you get 3.6. That's a bit cheating though.
aaronmorris
Head's a shed
I'm gonna make it louder
But being safe isn't very exciting is it :behindsofa: Who needs seatbelts
Dr_evil
Banned
But being safe isn't very exciting is it :behindsofa: Who needs seatbelts
I'd like some for greenlaning
don't want to get thrown out as I'll be going doorless I think
aaronmorris
Head's a shed
I'd like some for greenlaning
Yeah fairy snuff.
Something I've thought about in the past and always wondered is it actually legal to drive doorless?
aaronmorris
Head's a shed
Dr_evil
Banned
Ah gotcha' Lucky twunt
Buy an older one
I'm looking forward to using it in summer with no doors
marccleave
Active Member
I think videos will be needed when you've got the exhaust done. And the roof off. And the doors off.
Listen to that V8 roar! Don't be chicken and take it to 5,500rpm easy! :violent:
Listen to that V8 roar! Don't be chicken and take it to 5,500rpm easy! :violent:
Dr_evil
Banned
Dunno about 5500 pretty sure thats real close to the danger zone on these isn't it?
But exhaust will get sorted next week if I have time, no idea if I'll have to modify the passenger manifold slightly but hoping not! If so I can hook everything up and run the bastard plan is to have them hidden behind the rock sliders just at the back of the front wheel arches
pretty sure thats real close to the danger zone on these isn't it?But exhaust will get sorted next week if I have time, no idea if I'll have to modify the passenger manifold slightly but hoping not! If so I can hook everything up and run the bastard
plan is to have them hidden behind the rock sliders just at the back of the front wheel arches
aaronmorris
Head's a shed
Buy an older one
Hmmm, Now you mention it I'll be needing another project soon :scratching_chin:
aaronmorris
Head's a shed
have fun finding one for a good price
You seem to do alright
To be fair I seem to do alright finding cheap 90/110s , Well I say cheap no LR is cheap. So I should say reasonable.
Not had much to do with Series lr's so we'll see.
Dr_evil
Banned
You seem to do alright
To be fair I seem to do alright finding cheap 90/110s , Well I say cheap no LR is cheap. So I should say reasonable.
Not had much to do with Series lr's so we'll see.
I'm currently looking at stage 3 heads for this
