biggeeeee
Retired - Living the dream
I have been informed that the bushes on the Watts Linkage on my 51 plate TD5 are worn. Is there a way to test the linkage.
(I have a knocking noise coming from the rear axle somewhere)
Land Rover claim that the bushes cannot be bought seperately and the entire linkage must be purchased at almost £400.
Does anyone know if this is the case if not where can the bushes be obtained, is changing the bushes a diy job and are any special tools required.
The manual states that the air suspension is made safe before commencing work or the chassis may lower onto the bump stops - whats the best way to do this.
Many thanks
(I have a knocking noise coming from the rear axle somewhere)
Land Rover claim that the bushes cannot be bought seperately and the entire linkage must be purchased at almost £400.
Does anyone know if this is the case if not where can the bushes be obtained, is changing the bushes a diy job and are any special tools required.
The manual states that the air suspension is made safe before commencing work or the chassis may lower onto the bump stops - whats the best way to do this.
Many thanks