Shimsteriom

Master Procrastinator

• Apr 13, 2016

• #1

Evening All

Was getting my wheel tracking done today, and the garage has informed me that only the rears need doing, but they can't / won't do it until the watts linkage bushes have been renewed. Anyway, i asked him what he recommended, poly or rubber, to which he said that poly were loads better than rubber, although it would give a more firmer ride.

So, what's the general consensus on here, should I buy poly or rubber, and would OEM be the way to go?

Ta

 

jamesmartin

Well-Known Member

• Apr 13, 2016

• #2

be interesting to see how they are going to alter the rear tracking,oem are the best

 

Shimsteriom

Master Procrastinator

• Apr 13, 2016

• #3

jamesmartin said:

be interesting to see how they are going to alter the rear tracking,oem are the best

Click to expand...

Can I assume by this that you can't adjust the rear tracking on the TD5 Disco then?

 

jamesmartin

Well-Known Member

• Apr 13, 2016

• #4

no you cant ,but worn watts linkage bushes if very bad good throw the axle to one side a little

 

Dippypud

Never Knowingly Understood

Full Member

• Apr 13, 2016

• #5

jamesmartin said:

no you cant ,but worn watts linkage bushes if very bad good throw the axle to one side a little

Click to expand...

But it'll be fun to listen to the spanner swinger explain it ...

 

Shimsteriom

Master Procrastinator

• Apr 13, 2016

• #6

This is why I'm on this forum, everyday is a schoolday, well for me anyway!

 

Last edited: Apr 14, 2016