E
edbell2005
Guest
needin a new water pump in my 300tdi 90. how much should I expect to pay for this?includin labour?how many hours should it take?(i'm hopin it'l solve th constant squeakin)
lamriska
New Member
done mine 2 weeks ago , 200tdi , water pump from me local LR independant was £43 , the main prob i had was getting viscous fan off , once thats off only half day job , if that , but if you dont know when yer timing belt was last changed i'd do that anorl cos its reet next to it
pos
Well-Known Member
Hello,
Took me 10 mins to get the water pump off my 2.5 N/A, and I wouldn't have thought that the 300tdi is that much more complex. I'd probably expect it to take them half an hour to fit a new one for you tops, but they'd probably charge you or an hour. My local specialist is either £45 or £50 an hour and the pump will cost you about £20 which you could buy first and then ask them to fit
pump on paddocks (£16.44 + VAT):
STC1086 Water Pump - 300TDI
You could always just do it yourself, it's not that hard a job!
-Pos
Took me 10 mins to get the water pump off my 2.5 N/A, and I wouldn't have thought that the 300tdi is that much more complex. I'd probably expect it to take them half an hour to fit a new one for you tops, but they'd probably charge you or an hour. My local specialist is either £45 or £50 an hour and the pump will cost you about £20 which you could buy first and then ask them to fit
pump on paddocks (£16.44 + VAT):
STC1086 Water Pump - 300TDI
You could always just do it yourself, it's not that hard a job!
-Pos
ninety till i die
Well-Known Member
Just done my water pump on my 200tdi took bout 6 hrs cos three of the bolts had siezed n were buggers to shift even with loadsa heat on them.
You dont need a cranked spanner for the viscous fan just take the fan, pump and cowling off in one go and then undo the fan blade bolts and move the blades out of the way and you can get at it with a normal spanner.
You dont need a cranked spanner for the viscous fan just take the fan, pump and cowling off in one go and then undo the fan blade bolts and move the blades out of the way and you can get at it with a normal spanner.
topless_matt
New Member
On a 300tdi, it is a bit harder than on a sootdi.
On the 300 you need to remove the powersteering pump pulley to get enough clerance to take the pump out. Not hard to do, took me an hour start to finish, use lots pf penetrating oil ond make sure you have a good 10mm socket!
On the 300 you need to remove the powersteering pump pulley to get enough clerance to take the pump out. Not hard to do, took me an hour start to finish, use lots pf penetrating oil ond make sure you have a good 10mm socket!
E
edbell2005
Guest
cheers for th feedback!I aint brave enuf to hav a go at it meself, so it'l b interestin to see what i'l get quoted.i'm gonna put aside £500!!
Take your time and do it yourself, rewarding and much cheaper.
Just started to take apart my 110 to change clutch etc, learning all the time.
try this
water pump replacement 2.5 N/A T/D engines - LR4x4 - The Land Rover Forum
Just started to take apart my 110 to change clutch etc, learning all the time.
try this
water pump replacement 2.5 N/A T/D engines - LR4x4 - The Land Rover Forum
or ask someone local on lz to give yu a hand?
duz that cover a 300Tdi?
E
edbell2005
Guest
NOT AN EXPENSIVE REPAIR-AT LAST!!!
no needdddddd for a waterpump replacement,
jus a new cambelt!
th new one that was already put on musta been a bad'un out of th box!
£30 quid cost, I can deal wiv that, lovely jubbly
no needdddddd for a waterpump replacement,
jus a new cambelt!
th new one that was already put on musta been a bad'un out of th box!
£30 quid cost, I can deal wiv that, lovely jubbly
