GreenHornet
Well-Known Member
Simple to most complicated
Wiring bungs which have come out, there are a lot of wires there
Corner of windscreen leaking
Sunroof drain tube split?
Rear washer pipe disconnected
Rusty inner wing, remove the wing takes about 30mins and check inner wing
Wiring bungs which have come out, there are a lot of wires there
Corner of windscreen leaking
Sunroof drain tube split?
Rear washer pipe disconnected
Rusty inner wing, remove the wing takes about 30mins and check inner wing
remove the carpet and that ****e foam which acts as a sponge. when yu have removed it then yu can see where the water is coming in.
robint
Well-Known Member
3.5 efi
Well-Known Member
could be coming from pillar it seems to come from that area
Freediscoranger
Active Member
i had something similar, went when the windscreen chipped and had a new one fitted, they told me the seals had just disintergrated, and that solved that
take outer wing off and check inner wing area - the side panel rust through and vent for wiper bay drain in that area.
shocker
Well-Known Member
When you say soundproofing ....are we referring to the sponge under the carpet ? If so its best done away with in any way thats easiest . If you want some matting in there use karrimat type closed cell foam camp bed roll . You can get dumdum mat to stick on or paint on paste to deaden the metal panels if you feel the need , or even stick the closed cell down with contact adhesive . Me , I leave it unfixed so as it can be took out to dry the metal if flooded or for welding .
