aerofabrique said:

not seen that before, mine is just a standard moulded pipe outlet onto the top of the rad? Its not an OM rad and I cant see what sort of benefit that has?
How easy would it be to remove it?

Click to expand...

defender300td1 said:

Nor me I wonder if its part of the injection moulding to keep the hole so to speak,so now there are plenty without a hole in eek wierd isn't it.

Click to expand...

aerofabrique said:

could be to prevent it snapping off during manufacture/shipping or something stupid like that.

Click to expand...

defender300td1 said:

I jammed a drill bit in it you can push it untill flush and you can't pull it out a little more than what is showing but not right out I'm stumped meself like I'm going to wait and see what the Oracle says

Click to expand...

wammers said:

Talking of water just dropped me bloody iphone in the mop bucket. Hand to strip the bloody thing down and dry it out. Up and running now.

Click to expand...

wammers said:

As long as it's clear and unobstructed. Maybe there to strengthen the plastic pipe but never seen one before. The plastic pipe is notoriously easy to break off.

Click to expand...

The Mad Hat Man said:

yu are bloody lucky. most modern phones have a moisture detector on board which, when triggered, invalidates the warranty.

Click to expand...

defender300td1 said:

I see what you mean but tube is not fixed so offers no strength I'm comming to the conclusion it's to stop the water flow eroding the plastic away like water to a cliff , oops with the phone, now you can't make dirty calls anymore

Click to expand...

robcad1972 said:

Also make sure the hole is clear in the filler neck where bleed hose connects mine was blocked solid and was a pig to bleed til i cleared it.

Click to expand...