F

ferryhill flyer

New Member

• Jan 25, 2018

• #1

washer jets have broken off due to ice fall off roof on my 110 puma 59 plate anyone got any advice how to change it thanks

 

zeaphod

Well-Known Member

• Jan 25, 2018

• #2

If you search the forum you'll find the answer to everything: https://www.landyzone.co.uk/land-rover/replacing-windscreen-washer-jet-defender-tip.108178/

 

F

ferryhill flyer

New Member

• Jan 25, 2018

• #3

thanks zeaphod I thought it was a dash out job I will have a go at that in the morning

 

dag019

Well-Known Member

• Jan 25, 2018

• #4

Now would also be the perfect chance to upgrade them and fit a pair. If you use the holes for the left hand drive wipers there is no drilling. All you need is a y-peice to fit into the existsing pipe and then two new lengths to go to each washer jet, one each side. Big improvement over standard.

 

bluedog333

Well-Known Member

• Jan 25, 2018

• #5

dag019 said:

Now would also be the perfect chance to upgrade them and fit a pair. If you use the holes for the left hand drive wipers there is no drilling. All you need is a y-peice to fit into the existsing pipe and then two new lengths to go to each washer jet, one each side. Big improvement over standard.

Click to expand...

Pretty sure the Pumas don’t have the spare hole. One of the first ‘upgrades’ I did was to fit the extra washer, makes such a difference.

 

dag019

Well-Known Member

• Jan 26, 2018

• #6

bluedog333 said:

Pretty sure the Pumas don’t have the spare hole.

Click to expand...

I forget not all land rovers are old ones! Shouldn't be too difficult to drill a pair of holes if they are not already there though. It makes a huge difference, and I now have the wiper mounted jet bar off a Peugeot 405, even better again.