THE BUDDAH

New Member

• Mar 8, 2014

• #1

Hi,

After putting the front axle together im left with two washers, it would be rather cool if i knew where they should go...lol

Here they are:



Whos gona be the first to I.D them?
Or have i got me parts mixed up and they don't go on front axle?
They are about 3mm thick.

 

lilman

New Member

• Mar 8, 2014

• #2

I changed a cv joint on mine a couple weeks ago. Stripped back to axle and never saw anything like them. That was on a 91 200tdi.

 

P

Philip0603

New Member

• Mar 8, 2014

• #3

Hotpoint, Bosch, Electrolux........................??????????????????????? :lol::nothingtoadd::laugh:

 

THE BUDDAH

New Member

• Mar 9, 2014

• #4

I took the suspension turrets off also and thought they might have gone ontop but they dont fit in the recess.....mmm, i wonder where they go?

 

jamesmartin

Well-Known Member

• Mar 9, 2014

• #5

tie bar to steering box uses large washer as pictured

 

jamesmartin

Well-Known Member

• Mar 9, 2014

• #6

though looking again at tape measure pic radius arm bush to chassis

 

Mark151151

Active Member

• Mar 9, 2014

• #7

Look like radius arm to me

 

THE BUDDAH

New Member

• Mar 9, 2014

• #8

Philip0603 said:

Hotpoint, Bosch, Electrolux........................??????????????????????? :lol::nothingtoadd::laugh:

Click to expand...

lol

 

Mr Noisy

Coming in your ears.

• Mar 9, 2014

• #9

jamesmartin said:

though looking again at tape measure pic radius arm bush to chassis

Click to expand...

Ten points!

 

THE BUDDAH

New Member

• Mar 9, 2014

• #10

RRRRRRRR yea RADIUS arm.
I'd better go and look. i only have the two, so one each side.

Well this is what they look like before i put them back on the disco so i one each side with the nut.


Thank you all for response....Jolly good show.

They are the only bits left after putting the axle back together, forgot the radius arms were tucked away in the corner.

SO..here is a smile from me.

 

Last edited: Mar 9, 2014

F

flatline

Active Member

• Mar 9, 2014

• #11

Ooooo shiny bits,did you paint them?

 

Mr Noisy

Coming in your ears.

• Mar 9, 2014

• #12

Lolz I enjoy the smile

I'd like to say they are plated?

 

THE BUDDAH

New Member

• Mar 12, 2014

• #13

flatline said:

Ooooo shiny bits,did you paint them?

Click to expand...

Yes, i painted them after getting all the rust off zinc primer, red oxide then chrome colour.

Before.

 

F

flatline

Active Member

• Mar 12, 2014

• #14

Look much better than they did