Grit Valve
2000 4.6 Vouge
Get underneath to guide it In then stand up to push it in the rest of the way .
L66
easiest way I found is to take off the front bumper, undo the wiring plugs for the foglights, pull off the breather hoses as well and then just undo the 2 star bolts that hold it on. There are a coupleof plastic block that retain teh side parts & these have a metal clip that springs off with a scredriver
A littletap with the hand to break the seal and it just slides off it's runners. You can then get at teh bottle no prob - i did this when I had to replace my headlight washer pump as I couldn't get the foglights out the bumper (rounded & rusted screws, now drilled out & replaced) and I did it all, including refitting the bumper, in less than an hour
RAVE covers the process well but misses out the slap with the hand to break the seal
easiest way I found is to take off the front bumper, undo the wiring plugs for the foglights, pull off the breather hoses as well and then just undo the 2 star bolts that hold it on. There are a coupleof plastic block that retain teh side parts & these have a metal clip that springs off with a scredriver
A littletap with the hand to break the seal and it just slides off it's runners. You can then get at teh bottle no prob - i did this when I had to replace my headlight washer pump as I couldn't get the foglights out the bumper (rounded & rusted screws, now drilled out & replaced) and I did it all, including refitting the bumper, in less than an hour
RAVE covers the process well but misses out the slap with the hand to break the seal
