J

jake04551525

New Member

• May 5, 2010

• #1

i baught a medium duty 2" terifirma spring and shock set a while ago and stuck them in the workshop till i could get time to fit them, i recently took them out the box and im confused about the sizes,
my original 90 seems to have the same width springs front and back only difference is that the rear ones are a bit longer

the terifirma ones are longer and they are wider i dont think they will fit into the spring seats are they for a 110 or something?

my next question is would there be any point or benifits in making the chassis accept them?

 

hext

Active Member

• May 5, 2010

• #2

hi mate

have you got the part number you ordered? can you check this against the part number on the spring?

 

bustersbus

Well-Known Member

• May 5, 2010

• #3

Should be TF202 (all terrain) or TF208 (pro sport) fur the 90.
If it's TF203 (a/t) or TF209 (p/s) then they're fur the 110 / 130

Accordin' tae the brochure fur the kits.

 

Last edited: May 5, 2010

J

jake04551525

New Member

• May 5, 2010

• #4

cheers i will have a look when im up the workshop next

 

J

jake04551525

New Member

• May 5, 2010

• #5

would i get any benifits if i was to convert the chassis to accept 110 springs if they are 110 ones
its going to be a van carrying stuff about and towing anyway

 

johnlad

Well-Known Member

• May 5, 2010

• #6

the front springs are the same on a 90 and 110 the rear 110 are a wider diameter than the fronts