Occasionally whilst driving the amber TC and amber hill descent lights come on and then shortly after go out. Handbook says brakes overheating but these come on when I have driven only a short distance. Any ideas :confused:
 
Sounds like the dreaded 3 amigos.
The 1st thing to check is the brake pedal switch. Check out the sticky at the top of the forum.
 
aye , i just replaced the brake switch on mine recently after gettin the same two lights on as u say also had it reset and have had no proobs for a week or so now
 
After reading several posts on forum decided to remove brake pedal switch, play about with it by depressing plunger several times (which then meant plunger sitting lower than previous) and lo and behold problem gone away!!:)
Forum and advice very helpful
 

Similar threads