Hi all
got a 2004 TD5 auto Diesel. For no apparent reason get three "dings" and Handbrake, TC and ABS warning lights all show. Just as randomly they go off. Computer gizmo says "No Fault" Tried changing abs shuttle valve and control box but no success. Can anyone help please?
 
Sounds like the "three amigos". Search in here there's loads on it.

Mine needed both rear hubs changed to cure. But my fault codes were coming up as "intermittent abs sensor" faults L and R.

Not convinced your "gizmo" is the real deal!!
 
What "gizmo" are you using and where are you? If you have the warning lights there will be an active fault, if they have gone away there will be a logged fault in the slabs ecu.
 
Hi all
got a 2004 TD5 auto Diesel. For no apparent reason get three "dings" and Handbrake, TC and ABS warning lights all show. Just as randomly they go off. Computer gizmo says "No Fault" Tried changing abs shuttle valve and control box but no success. Can anyone help please?

1. confirm no HDC(hill descent controll) light? and if it's so does the amber HDC light work on self test?

2. as asked before, what kind of "gizmo" was used?
 
Thanks for the replies. Don't know the make of the "gizmo" but it's in a specialist landrover garage Nr Leeds. The HDC light works and at times has shown with the other three lights but not for some time. seems to be the same three lights. No live or logged fault showing on the computer.
 
Just had this and fortunately just a FOS speed sensor replacement. Job done. It's usually just a sensor, but strange you've not got fault codes...?! What garage is it..?
 
Hi
garage is Diso Centre Pool in Wharfedale. They already checked a load of stuff including sensors but are consulting their Technical Boffins and I'm still waiting a verdict. I started to wade through "Three Amigo" ( very droll) and almost wish I hadn't! They've obviously got plenty of choice. have noticed like someone else pointed out it seems to be less prevalent in dry weather?
 
Landy Indy I use informed me an intermittent fault that's cleared when you switch off and back on can be indicative of shuttle valve issue. Could just be the switch or the valve but I can't remember what exactly the difference in code is. Sure some boffin on here will know though.
 

Similar threads