:) not to worry i will carry on with car,and find defect eventuly ,its been over a year now since started:confused:
 
wooly123 said:
hi engine was out,wells reid did it,full recondition,heads skimmed pressure tested,and block,new rings bearings etc,has not run before or after recondition,no fault codes,will try it disconect maf today,thanks Adam.
Click to expand...

ok. this is getting interesting. .. so... why was the engine recon'd ? did the recon people test run it before returning ? if its not throwing any fault codes, that would lead me to think of something that is not sensed.. it turns over, but doesn't fire up. unless you throw some easy start into the inlet , then it will fire but not run is that correct ?
 
ukadamwest said:
you get a 10/10 for persistence !
Click to expand...
thanks Adam,they said they had it running on easy start to test it ? but they wernt sure about electrics,I will try it today with easy start see if it runs,also disconect maf and try,also jump fuel relay try,thanks
 
I wouldn't use too much easy start if I were you, you'll kill it.
If they replaced your engine, surely it's up to them to get it running properly.
They haven't got the cam timing out or something?
 
wooly123 said:
thanks Adam,they said they had it running on easy start to test it ? but they wernt sure about electrics,I will try it today with easy start see if it runs,also disconect maf and try,also jump fuel relay try,thanks
Click to expand...


question.

when you try to start it have you pulled the plugs to see if they are wet with fuel ?
 
will do tomorow,nanocom produced code p0201 today , circuit open or short, cleared it but keeps coming back,also disconected maff and it fired once, jumped fuel relay ,still no start,also on imputs security learn no, security mobilised yes, nanocom says ecu is 4litre manual?i have got more ecu s to try,thanks adam
 
wooly123 said:
will do tomorow,nanocom produced code p0201 today , circuit open or short, cleared it but keeps coming back,also disconected maff and it fired once, jumped fuel relay ,still no start,also on imputs security learn no, security mobilised yes, nanocom says ecu is 4litre manual?i have got more ecu s to try,thanks adam
Click to expand...
d
Do i need a syncmate to get it started as nanocom wont ,or am i doing it wrong as usual,i just thought as i have engine check light ,which goes out whe n cranking,it would start ?thanks for any info in advance,
 
No blacklist....just we all have second lives outside of LZ...and at times, we are busy and not able to reply.....like now, I have only popped on while I check the traffic before I head home from work...
 
Looks like @merlyn82 lost the will to live.

There's a Land Rover place in/near Chesham that's supposed to be good. Never used them myself. If he comes back I'll try and find out the address. Don't go near John Dennis unless you want your wallet emptied while monkeys play with your car.
 
Saint.V8 said:
No blacklist....just we all have second lives outside of LZ...and at times, we are busy and not able to reply.....like now, I have only popped on while I check the traffic before I head home from work...
Click to expand...
Nope, not allowed. You in particular, must be available at all times. No work or family time allowed! ;)
 
Saint.V8 said:
No blacklist....just we all have second lives outside of LZ...and at times, we are busy and not able to reply.....like now, I have only popped on while I check the traffic before I head home from work...
Click to expand...
Calling a Range Rover a jeep will get you black listed.
 
ukadamwest said:
Calling a Range Rover a jeep will get you black listed.
Click to expand...
He said that word....
giphy.gif
 
You must log in or register to reply here.

Similar threads

ar1g3
P38A Looking for p38 parts in Kent area
Replies
13
Views
938
Datatek
Datatek
Radar1946
P38A Mobile mechanic near Lichfield, Staffs.
Replies
13
Views
581
Radar1946
Radar1946
S
Hi, Im Spencer, From Hants, got a P38 that wont go
Replies
4
Views
368
kermit_rr
kermit_rr
R
Sport AJV8 need mechanic in East Yorkshire
Replies
10
Views
691
Datatek
Datatek
B
Mistake with coolant flush?
Replies
11
Views
857
Bellhouse
B