Hi I am still having problems with the TPS sensor on my 1.8 Freelander.
When I read the error I now get P0122 error code which will not clear.
I have used a multi meter to measure the 3 wires connected to the sensor.
The bottom wire reads 0. This is the Earth.
The top wire from the ECU reads 14v which is surprising as the book says this should be 5v.
The middle wire which is the return to the ECU reads 2.95v at throttle closed. This should be less than 1v at closed throttle.
Can anybody shed any light on what is going on.
When I read the error I now get P0122 error code which will not clear.
I have used a multi meter to measure the 3 wires connected to the sensor.
The bottom wire reads 0. This is the Earth.
The top wire from the ECU reads 14v which is surprising as the book says this should be 5v.
The middle wire which is the return to the ECU reads 2.95v at throttle closed. This should be less than 1v at closed throttle.
Can anybody shed any light on what is going on.