B

baldybrewer

Member
Hi could someone be so kind as to post a link or an image to what the spanner looks like as I need to remove the fan to change the thermostat thanks.
 
this http://www.paddockspares.com/td5-viscous-fan-spanner-set.html

or this

5730_Left.jpg
 
Ive had to go to halfrauds to get one as I ve only got today to get it done just hoping it works as theres only one spanner.
 
baldybrewer said:
Ive had to go to halfrauds to get one as I ve only got today to get it done just hoping it works as theres only one spanner.
Click to expand...
If you get the spanner on and give it a good whack on the end with a hammer it should come undone without having to hold it,when you put it back do the same, they're sort of self tightening while rotating should be safe
 
No such luck spent an hour trying to get it to budge am gonna try and knock something up that will hold it tight while I try and undo it.
 
Put a long arm 15mm spanner on the belt tensioner's bolt and push it against the belt while hitting the fan wrench
 
before I got the spanner for the job the fitter in my work hit it a crack with a hammer and chisel and it just spun off worth a go if your stuck
 
I was skeptical about spending 25 quid or so on spanners at first, but once you see how big and thick they are you see why.
Well worth it if you ask me, had that fan off a good 10 times probably :p
 
camy1960 said:
before I got the spanner for the job the fitter in my work hit it a crack with a hammer and chisel and it just spun off worth a go if your stuck
Click to expand...
its better not to use a chisel but a long flat headed punch and hit the center of each flat,once ytouve hit each flat a time or two it comes off without damage to the nut
 
jamesmartin said:
its better not to use a chisel but a long flat headed punch and hit the center of each flat,once ytouve hit each flat a time or two it comes off without damage to the nut
Click to expand...

I can vouch for this - it was the only thing that worked for me first time viscous fan came off. Bit of copper grease on the thread and one smart tap on fan spanner has been enough since
 
You must log in or register to reply here.

Similar threads

P38Seb
P38A Viscous fan woes
Replies
8
Views
758
kermit_rr
kermit_rr
MAF Diver
Disco 2 Unknown coolant leak at the front onto the oil filter and diff
Replies
0
Views
172
MAF Diver
MAF Diver
S
Disco 2 Squealing fan belt?
2
Replies
20
Views
1K
Stanleysteamer
Stanleysteamer
L
DISCOVERY 1 HEATER BLOWER
Replies
6
Views
713
lrjohn
L
P
Disco 4 Crossover pipe blowing
Replies
17
Views
2K
Graculus
Graculus