A

adam321

New Member

• Jan 11, 2011

• #1

Hi guys my clutch pedal when engaging is very annoyingly squeeky on my FL1 anyone else have this problem and can advice on making this bloody noise go away.

Cheers adam

 

Mantamad

New Member

• Jan 11, 2011

• #2

Is it the clutch pedal itself thats squeaky? if so give the spring at the pedal pivot a greasing.

If its a squeal from the clutch itself when the pedal is pressed then possibly a failing clutch release bearing which is a gearbox out job to fix.

 

A

adam321

New Member

• Jan 12, 2011

• #3

Yeah its the clutch pedal itself that is squeaky i will give the spring a good grease to see if that solves it thanks for the advice.

 

D

D3savage

Active Member

• Jan 12, 2011

• #4

Hiya mine did this....and it's really annoying......you need to apply grease quite liberally....if you get a small torch shine it up under the dash and you will see a spring .... if you touch the spring and operate the pedal a bit....you will feel the sping is actually scraping the pedal arm during operation (bad design) apply plenty of grease in that area (preferably moly grease) and it should gradually become allot better. Good lck mine drove me nuts......there is still a tiny squeak but it is 10 time better.

 

Northern Irelander

Well-Known Member

• Jan 12, 2011

• #5

The banking plate welded on to bulkhead can also squeak, pack it out or drill, tap and bolt it down