Castor

Trainee maniac

• Oct 11, 2015

• #1

Chaps/esses.

I have a pair of ID plates that came off my ex- MoD FFR 109 Landy which is now fully reassembled. Is there a guide anywhere that shows where on the vehicle they should live?

One's about 3x3 part no 5720 and has the VIN on it + "LAND ROVER UK LTD" and four lines saying 2760Kg, 6760Kg, 1-1050Kg & 2-1710Kg.

The other's about 6x2-1/2 and I think that's the MoD plate.
Says "TRUCK UTILITY FFR 3/4-TONNE-4X4" also has VIN and the old MOD reg on it.

Correct positions appreciated.

 

davebeccles

Active Member

• Oct 11, 2015

• #2

This should help with the first one, engine side of the bulkhead.

 

chris7

Well-Known Member

• Oct 11, 2015

• #3

SERVO and DUAL circuit brakes?? CANT be a LANDY!!

 

Castor

Trainee maniac

• Oct 11, 2015

• #4

davebeccles said:

This should help with the first one, engine side of the bulkhead.
/QUOTE]
Eeeeet most certainly does! Thanks - much appreciated. One plate and two holes accounted for.....

Click to expand...

 

davebeccles

Active Member

• Oct 12, 2015

• #5

What does your other plate look like. Mine is ex mil but I haven't found any other plates and I've stripped it right down!??

 

Castor

Trainee maniac

• Oct 12, 2015

• #6

davebeccles said:

What does your other plate look like. Mine is ex mil but I haven't found any other plates and I've stripped it right down!??

Click to expand...

>>>The other's about 6x2-1/2 and I think that's the MoD plate.
Says "TRUCK UTILITY FFR 3/4-TONNE-4X4" also has VIN and the old MOD reg on it.

I found the matching holes! On the drivers side of the seat box, so it's in front of you when you open the door.

 

samc88

Drivels spiritual representative

• Oct 13, 2015

• #7

The id plates are on the bulkhead inside the cab on mine

 

Castor

Trainee maniac

• Oct 13, 2015

• #8

samc88 said:

The id plates are on the bulkhead inside the cab on mine

Click to expand...

I'm forming the opinion that the plates are wherever they felt like putting them that week.