Hippo
Lord Hippo
Been testing ma vcu quite a bit recently and it's the reason for the tyre change. I've found on both new and previous tyres the vcu gets hotter at 60mph constant as opposed to 30mph constant, over the same distance. Logically you would think it's the oppersite. Previous tyres could heat up the vcu much quicker than the new tyres. Peeps won't believe me when I tell em why, and how amazed I was to find out... by mistake... the debate will start LZ style. I will write up whats been going on at hippo towers from the start and why changing my vcu for the fault I found would have been pointless. Trunip Test is the answer to all our problems, I finks.Looking at the temperature hysteresis curve for gaylander VCUs, I would suggest that anywhere between 10C and 85C should be fine and 10C above ambient shows that the VCU is actually working. The VCU locks up at about 100C. I would be concerned about a larger increase at Motorway speeds as the VCU should be working at its easiest, as there is the minimum difference between front and rear road speeds, compared to lots of roundabouts and bends....
If temp of VCU is either too hot to touch or at ambient, those are the times to be concerned.
Yup. Drove 80 miles yerterday at 60mph whilst stopping at intervals to check ma vcu's temp. Lets just say I is now a happy hippo, with a happy hippo....Hippo will too - as I'm sure he likes to play with his infra-red thermometers.
...Singvogel.
[smile]Turnip Test Rules[/smile]