Cameron.anthony
New Member
My disco seems to miss slighty on one cylinder....but really only when i'm doing between 60-70mph. It just had a service and I have replaced all the spark plugs and HT leads....any ideas?????
chappers90V8
New Member
Is it speed related or at a certain RPM?
Cameron.anthony
New Member
Speed related...any ideas???
chappers90V8
New Member
What engine is it, what year? You sure its the engine missing and not something else, a problem in the running gear maybe???
Cameron.anthony
New Member
'P' Reg 3.9 v8i Petrol. How could I determine if it was the running gear??
fett
Well-Known Member
What parts did you get , there a big differnce between , genuine landrover lucas , lucas itself and other makes.
I had lucas stuff all new and it would not run right, tried alot of other makes too then finally got the cash and got genuine landrover lucas stuff from the dealer (via stuart) and now it runs properly at all times, would have been much cheaper and less hassel to go that way in the first place!
I had lucas stuff all new and it would not run right, tried alot of other makes too then finally got the cash and got genuine landrover lucas stuff from the dealer (via stuart) and now it runs properly at all times, would have been much cheaper and less hassel to go that way in the first place!
Cameron.anthony
New Member
That sounds about right....I will try some of my mates 'proper' leads and see how that goes...thanks for the advice
vougese39
Well-Known Member
also recheck the plugs as they could have wiped copper slip on it and it is shorting out! they could have also drop the plug and the ceramic is rattling up and down the plug!
is the timing right did they do the fuel filter? had a disco and it was full of rusty fuel pipes and had blocked the filter and the fuel rail
is the timing right did they do the fuel filter? had a disco and it was full of rusty fuel pipes and had blocked the filter and the fuel rail
