J

jasonslaphead

Active Member

• Nov 28, 2019

• #1

D1 V8 not starting have had the AA out he was here a good while checking but couldn't pin it down. Has no spark or fuel there is power to the coil but no trigger to fire it. The inertia switch is not operated. Immobiliser appears to work by the flashy light.
Anyone have any ideas

 

discool

Well-Known Member

• Nov 28, 2019

• #2

Thats what the D1 immobiliser does, cuts the ignition and in an a roundabout way the fuel pump, So are you still able to crank the engine? which the immobiliser should also prevent if the system is fully functional,

 

J

jasonslaphead

Active Member

• Nov 28, 2019

• #3

discool said:

Thats what the D1 immobiliser does, cuts the ignition and in an a roundabout way the fuel pump, So are you still able to crank the engine? which the immobiliser should also prevent if the system is fully functional,

Click to expand...

Engine turns over fine

 

discool

Well-Known Member

• Nov 28, 2019

• #4

jasonslaphead said:

Engine turns over fine

Click to expand...

Ok then run a temporary wire from the battery + across the engine to the coil + and see if the engine starts. The coil + terminal has a white/ black wire clipped to it, iirc...

 

Last edited: Nov 28, 2019

J

jasonslaphead

Active Member

• Nov 28, 2019

• #5

Will try in the morning