kurgan
Active Member
I've got a new crank position sensor.Crank position sensor is common, also check the coolant temp with diag as the sensor can fault to 140c and stop the motor running..
kurgan
Active Member
Still to be fitted.
it definitely unscrewed but i never tried it, maybe someone modified itI tried to unscrew it, just a blank on mine could of been different on yours,
Henry_b
Think outside, no box required.
kurgan
Active Member
Can someone stick an arrow on the pics so I know where to look. Thanks.
kurgan
Active Member
Yes my replacement one is a genuine Bosch. Not a chinese-ium Knock off.My money is on the crank sensor..
So more digging
www.landyzone.co.uk
J
thor 4.6 v8 wont start properly ???
hi lads , I have a 2000 model 4.6 v8 thor engine petrol/lpg . had car for 4 yrs usually starts 1st button last 4 weeks wont fire up 1st thing in morning ????????? its taking 4/5 turns to fire up then ok all day .. in last week had new battery fitted ????? still same :mad::mad::mad: had...
www.landyzone.co.uk
Attachments
Maybe @Henry_b is the one with the dodgy rail that's been blanked offSo more digging
*Urgent* D2 V8 Thor 4.0 won't start.
Urgent Help, my wife's D2 V8 was running perfectly last week. We've spent a lot of money replacing the engine and having some preventative welding done. As of 2nd Jan it will crank but won't start. Battery was replaced yesterday 8/1/24. Turning the key the the battery light is on and the check...
J
kurgan
Active Member
Thanks very much.So more digging
*Urgent* D2 V8 Thor 4.0 won't start.
Urgent Help, my wife's D2 V8 was running perfectly last week. We've spent a lot of money replacing the engine and having some preventative welding done. As of 2nd Jan it will crank but won't start. Battery was replaced yesterday 8/1/24. Turning the key the the battery light is on and the check...
J
kurgan
Active Member
The big silver sticky out bit?
Henry_b
Think outside, no box required.
yes on mine you can't do anything with it, it's a blank.The big silver sticky out bit?
CPS most likely, if in doubt pulling a plug or 2 will be far quicker than pulling the upper intake off..
kurgan
Active Member
***Update*** still won't start - I now have access to a nanocom for a D2 V8 - does anyone have a step by step guide of what I should be looking for going through the nanocom options. When plugged in it keeps coming up with an intermittent error - issues connecting to ECU. Any help would be appreciated as the wife has said if its not fixed soon- scrap it. I also have a paired ecu and bcu with eka code from a donor car.
kurgan
Active Member
Got a Nanocom to borrow, no fault codes in engine or gearbox. Still won't start.
Hey would a faulty crank sensor show up as a fault code?My money is on the crank sensor..
