brianp38dse
Well-Known Member
the engine ecu which has the ems code is located in the black housing behind the battery, may be worth giving the connections a check and clean cant do any harm.
Wazzajnr
Well-Known Member
Probably am in a couple of weeks but I don't have the doozle license on my nanocom so doubt I'd be any help.
I'm assuming for syncing it would need to be able to read the engine ecu?
Yes but I was hoping to rule out a dodgy ODB socket. Once that is good a kicker should sort it. I think he's now planning on sending them off to Marty or Rick so should be sorted soon.
Wayne burgess
Member
I’ve sent the becm and ecu off to marty on the forum he’s messaged me today saying it was out of sync he’s done it now so hoping it’s done the trick
Right, while you're waiting get under the glove box and squirt electrical contact cleaner all over the ODB socket. Might be worth taking it off and checking he back for green too. With a working ODB socket a syncmate should work.
Is @martyuk disabling passive immobilisation? MIne's never gone out of sync since I disabled it.
Wayne burgess
Member
I’m not sure about the disabling mate
It might have been coincidence (sample size = 1!) but worth a try to stop it happening again.
Wayne burgess
Member
Had becm and ecu back today put it on with a fully charged battery it fired straight up so really happy with that thanks Marty too msn top service
Wayne burgess
Member
I etc mate top stuff..at least from the end result ppl with similar issues this can help them now too
Wayne burgess
Member
Yes I did notice really appreciate it thanks again Marty
There're 2 codes worth putting in your mobile phone: the EKA code and the EMS code.
Wayne burgess
Member
Have done cheers
Rick-the-Pick
Active Member
I've just read the start of the thread & Out of sync was screaming at me, & it took two pages & god know's how many posts to get to the end of it.
Martyn, you're clearly slacking.
Martyn, you're clearly slacking.
martyuk
Well-Known Member
Who, me? I'm Martin with an i, not a y.
I did resync it - it screamed to me of sync too (the first thing I mentioned in my first post?). When it came to me, 10 minutes on the bench and it was sorted...
Slacking... well, I've just been out of the country working for 3 weeks, and about to head away tomorrow for another 2 weeks work, but I did manage to get this sorted and sent back nearly a month ago before I went...? so don't quite see how that's slacking...
I did resync it - it screamed to me of sync too (the first thing I mentioned in my first post?). When it came to me, 10 minutes on the bench and it was sorted...
Slacking... well, I've just been out of the country working for 3 weeks, and about to head away tomorrow for another 2 weeks work, but I did manage to get this sorted and sent back nearly a month ago before I went...? so don't quite see how that's slacking...
myfirstl322
Well-Known Member
You tell him Martini.
