thebluemax
Active Member
as part of my service for the TD4 I was going to change the underbonnet fuel filter, but looked all over for it, read somewhere that it is around the battery/fuses area....cant see a thing, also having just done an EGR bypass(all seams well) the one side that the vacuum pipe used to fit onto on the old unit will still push onto the new bypass thin arm, BUT this small arm is drilled straight through, presumably to fit a boost gauge (the seller said), so will it change anything if I just connect the vac pipe to it or should I blank off the thin arm altogether and also blank off the vac pipe ?
sorry its a bit long winded.
sorry its a bit long winded.