Discomex

Member
Hi guys
I have a D2 2"lift and 285 75 16 discovery stt pros tryes with offset modulers now the problem is they seam to stick out more on the drivers side then the passenger side? I have asked about at work lads say check your watts linkage done nowt that a can see there. Any ideas gents?
 
Day Shar Vue... We had a similar question the other day and it turned out that the watts linkage had been reassembled incorrectly and entire body had moved to one side making the tyres stick out more than they should.
Would be one hell of a coincidence if you have the same issue. o_O
 
@Discomex don't forget to post back when you find the issue, or if you need any help from the experts on the forum
(I'm not one of them by the way!)
:)
 
Time for pics me thinks:)

As in referenced thread pics says it all and helps the eggsquirts.

J
 
Hi mate
I've just had the same problem turns out the watt lineage was put together the wrong way yellow ones the correct way .old rusty one the wrong way..
 

Attachments

  • Screenshot_20190522-195329_eBay.jpg
    Screenshot_20190522-195329_eBay.jpg
    169 KB · Views: 93
  • 20190522_185756.jpg
    20190522_185756.jpg
    233.7 KB · Views: 87
And pictures of the rear springs
 

Attachments

  • 20190527_151341.jpg
    20190527_151341.jpg
    260.5 KB · Views: 73
  • 20190527_151404.jpg
    20190527_151404.jpg
    271.6 KB · Views: 124

Similar threads