W

w509yer

New Member

• May 30, 2010

• #1

My driver door mechanism is knackered, and looking at a spare scrap one I have, that is badly worn also - can you buy these, and if you can, how the hell do you refit one? No way the whole frame mechanism will come apart, so do you cut / weld the inner door?

If you cannot get a mechanism, are there any others that can be "made" to fit, or is it finding a second hand one that is not completely gone

 

the hooded claw

Well-Known Member

• May 30, 2010

• #2

w509yer said:

My driver door mechanism is knackered, and looking at a spare scrap one I have, that is badly worn also - can you buy these, and if you can, how the hell do you refit one? No way the whole frame mechanism will come apart, so do you cut / weld the inner door?

If you cannot get a mechanism, are there any others that can be "made" to fit, or is it finding a second hand one that is not completely gone

Click to expand...

You aint alone here Fella .....Mines in an identical state (its sheared off at the top, sorta triangluar bit, bout the centre of the door)

I used some of that "Liquid Metal" to bond the sheared off bit back together...(That was yesterday afternoon) ...I aint bin out to look how it faired yet this mornin !!!!

 

B

burnie

New Member

• May 30, 2010

• #3

hi mate they cost about 45 on ebay just done mine not to bad ajob takes 1hr 2do.bernie

 

W

w509yer

New Member

• May 30, 2010

• #4

do you have a link to the ebay seller
cheers
Simon

 

B

burnie

New Member

• May 30, 2010

• #5

no sorry simon just got 1st one i saw good looking mate.bernie