Vagrant said:

I removed my Instrument panel at the weekend to change the bulbs (from horrible blue ones to green LED). I decided to clean everything up, removed the gauges, tidied the loom up and cleaned all the crud out. Whilst taking it apart, I took the warning lamp panel out…shock horror, two places sealed off with black insulation tape….obviously so that nobody can see the warning lights on. Anyway after a reinstall it seems that the two culprits are the ABS light and the Brake warning light……Hence I masked them off again quickly….

Any advice on where to start troubleshooting the issues?

Thanks in advance

Phil

Click to expand...

kwak lad said:

Start with the wheel sensors probably stems from them ,
And plug in a Nanocom and clear faults and read code to pinpoint cause

Click to expand...