tarphenry

Well-Known Member

• Nov 13, 2022

• #1

Hi all, been playing this weekend ,(Maintainence mainly) I tried to move the wastegate acuator and it doesn`t move. I am thinking it is seized. Nanocom showing no boost so this confirms it I think. Is it possible to free it or shall I just take the Turbo off . Any thoughts please. Thanks all.

 

Datatek

Well-Known Member

• Nov 13, 2022

• #2

tarphenry said:

Hi all, been playing this weekend ,(Maintainence mainly) I tried to move the wastegate acuator and it doesn`t move. I am thinking it is seized. Nanocom showing no boost so this confirms it I think. Is it possible to free it or shall I just take the Turbo off . Any thoughts please. Thanks all.

Click to expand...

Seized open sounds unlikely as it spends a lot of time closed. How did you check for boost pressure?

 

tarphenry

Well-Known Member

• Nov 13, 2022

• #3

Nanocom shows 1. something even when revved never moves

 

Last edited: Nov 13, 2022

Datatek

Well-Known Member

• Nov 13, 2022

• #4

tarphenry said:

Nanocom shows 1. something even when revved never moves

Click to expand...

That could be a duff MAP sensor, blipping the throttle doesn't have a lot of effect, if it's an auto, put it in gear, left foot hard on brake and bring the revs up slowly. I have a turbo on the bench at the moment, I'll have a close look at the waste gate tomorrow and maybe take photo's.

 

tarphenry

Well-Known Member

• Nov 13, 2022

• #5

Thanks ,I appreciate that

 

Datatek

Well-Known Member

• Nov 14, 2022

• #6

tarphenry said:

Thanks ,I appreciate that

Click to expand...

Unfortunately the bit I wanted to show you has gone in the bin
The waste gate is opened by pressure in the compressor side with spring return. It's normal state is closed. Anything is possible but it seems unlikely that it would stick open. You could pull the pressure pipe off and see if you get boost pressure. On my diagnostics, I get boost pressure and atmospheric pressure shown. To raise the boost pressure you have to do more than blip the throttle.

 

Last edited: Nov 15, 2022

tarphenry

Well-Known Member

• Nov 14, 2022

• #7

Thanks for that Keith, I will give it a good looking at on the next nice day we have. Thanks again

 

dubbleRR

Well-Known Member

• Nov 15, 2022

• #8

The engine has to be ,strained slightly to get the turbo boosting ,,If you watch modified tractor pulling ,they gently up the strain till the turbo comes on song and whistling ,then usually BANG ...