Suris
Banned
:welcome2: I'll tell you the answer to your question if you can tell me how long this bit of string is in my pocket.
blue beasty
Leaks an prone to bits dropping off
:welcome2: I'll tell you the answer to your question if you can tell me how long this bit of string is in my pocket.
Thats not string
Suris
Banned
wiltshire landyman
I’m back
twice half its length now whats the answer:welcome2: I'll tell you the answer to your question if you can tell me how long this bit of string is in my pocket.
Optimus Prime
Well-Known Member
Hi Robin, welcome to the forum. Ignore the drivel from these idiots, they obviously can't be arsed to give an answer that will help you solve your problem.
Luckily, there are some forum members who are more helpful and will offer actual solutions to your problem.
In this case, luckily, the solution is simple:
DON'T REV IT PAST 2500 RPM
Simples.
jamesmartin
Well-Known Member
split pipe ,poorly turbo or restricted air flow feel aroud pipes for leaks while someone revs engine,remove pipes of inlet side at turbo both from filter and one to intercooler and rev it see if it still squeals ,check to see with engine off whether turbine shaft can be moved enough so that blades hit housing
Suris
Banned
Ya bastid, yer so cool ya must **** ice cubes :hysterically_laughi:hysterically_laughi: cool:
Suris
Banned
jamesmartin
Well-Known Member
you really have nothing useful or even funny to say ,storm and nigbo have wit you have none is trying to niggle me the only way you can get any attention,
James could you please clarify that this must be done whilst the vehicle is stationary...
jamesmartin
Well-Known Member
if your going to have a go it must be done at 50 mph
sible88
New Member
Now that's just silly should be atleast over 85 it's the law
Suris
Banned
James could you please clarify that this must be done whilst the vehicle is stationary...
Come on Dippy, they's got roller skates and braces.
Suris
Banned
tomkettlewell
New Member
bottom elbow sometimes splits, check all pipes but before you buy new pipework just check the inlet manifold bolts, yes i am speaking from experience! ordered new pipes other day and just checked inlet manifold low and behold loose bolt! yes it is fixed now and the pipes have yet to arrive :doh:
