L

LearningDiscos

New Member

• May 26, 2024

• #1

Hi all,

Got a decent disco 2, td5 2003 recently, several of the seals / boots have gone so we’re working on replacing them. Currently working on getting the front LH suspension arm ball joints replaced, been able to break the upper joint but the lower one seems impossibly stuck! Tried getting it out with the pickle forks and heat which worked on the upper but the lower won’t budge. Short of cutting it off, anyone got any tips or tricks for getting it out? Gone through the tutorials online and they’re all saying it should come off with a bit of force.

 

Attachments

• 
  IMG_0299.jpeg

  411.5 KB · Views: 92
• 
  IMG_0300.jpeg

  330.4 KB · Views: 79
• 
  IMG_0301.jpeg

  254.5 KB · Views: 91

A

Anaconda

Well-Known Member

• May 26, 2024

• #2

 

L

LearningDiscos

New Member

• May 26, 2024

• #3

Thank you, the nut is off and we’ve tried breaking the taper by hitting it but unfortunately that’s not worked either, we’ve tried the 25mm nuckle fork, tried using two hammers with one working as an anvil and tried heating it but it’s still not budging!

 

Last edited: May 26, 2024

frostythor

Well-Known Member

• May 26, 2024

• #4

9 inch grinder with a cutting disc, just cut it off, then remove the stubs and the remains of the ball joints

 

Last edited: May 27, 2024

L

LearningDiscos

New Member

• May 27, 2024

• #5

frostythor said:

(inch grinder with a cutting disc, just cut it off, then remove the stubs and the remains of the ball joints

Click to expand...

That worked, thank you!

 

frostythor

Well-Known Member

• May 28, 2024

• #6

I used self tappers and clips, as you dont need a rivit nut gun to do them