johnlad

Well-Known Member

• May 27, 2012

• #1

im looking for the part of the transfer box linkage that attaches the linkage to the transfer box using a 13mm nut, and also the bent steel rod from linkage to the part ive just mentioned.

its for a defender 200tdi box

hope that made sense to some one

 

johnlad

Well-Known Member

• May 27, 2012

• #2

These are the parts I'm looking for, or even the part numbers so I can order new..

Thanks

 

jamesmartin

Well-Known Member

• May 27, 2012

• #3

link is ftc3698 and needs two clips ftc3674,the lever only comes as part of an assembly frc8041 ,all levers of lt230s are the same ,links vary

 

johnlad

Well-Known Member

• May 27, 2012

• #4

thanks james

 

M

Markt4425

Member

• May 30, 2012

• #5

Hi John, I may have a link kicking around down at my fathers barn, if you are not in a desperate hurry for it, I could have a look for it over the weekend and let you know if I have found it Mark

 

johnlad

Well-Known Member

• May 30, 2012

• #6

Markt4425 said:

Hi John, I may have a link kicking around down at my fathers barn, if you are not in a desperate hurry for it, I could have a look for it over the weekend and let you know if I have found it Mark

Click to expand...

thanks for that, let me know, in the meantime i made a link from a 6" nail and it works great

 

jamesmartin

Well-Known Member

• May 30, 2012

• #7

johnlad said:

thanks for that, let me know, in the meantime i made a link from a 6" nail and it works great

Click to expand...

progably a lot stronger than the original part

 

johnlad

Well-Known Member

• May 30, 2012

• #8

jamesmartin said:

progably a lot stronger than the original part

Click to expand...

i'll photo it, its looks identical to the original, the only difficult part was drilling it to accept split pins

 

jamesmartin

Well-Known Member

• May 30, 2012

• #9

**** you managed it i think id have used starlock washers

 

johnlad

Well-Known Member

• May 31, 2012

• #10

jamesmartin said:

**** you managed it i think id have used starlock washers

Click to expand...

would of been easier but on a sunday afternoon i was right out of starlock washers, lol

 

M

Markt4425

Member

• May 31, 2012

• #11

well if the 6" nail works, what do they say, if it aint broke - don't try to fix it!! I'll still raid my spare parts bin at my fathers over the week end and see if I can find an inferior original part