leeby7

leeby7

Active Member
Can anyone tell me the easiest way to find this as I need to remove it to check for free play in the transfer box to get to the bottom of this clunking problem that's doing my nut in?

tar lee
 
first time I have owned a landy and prob had it about 4 month take that into consideration pal!
and I am more than willing to take the gears apart.
 
Right ok so with the plate off how do you check for play in shaft? do you get an assistant to bring clutch up to biting point and look for the slack? its rotational slack that its got?
mr evil :D
 
put it in neutral on both boxes and rotate the gear with your hand one way then the other, shouldn't be much in it if its a good box

I had sweet #### all in mine but its only done 77k
 
I would have taken one when I checked but I was covered in grease…….remove the only round cover and its just a gear you'll see behind it
 
did what you said and when I turned it quick from left to right there was a bit of play but very minimal, what do you think
 
You must log in or register to reply here.

Similar threads

J
Defender TD5 transfer box
Replies
2
Views
531
tottot
tottot
O
300 tdi transfer box
Replies
4
Views
744
old chap
O
I
Td5 transfer box in a puma
Replies
1
Views
469
Mark Piercy
Mark Piercy
s8ndst0rm
Transfer box clunk, low revs, whilst turning
Replies
11
Views
2K
lynall
L
Lej
C reg speedo not working
Replies
14
Views
981
doriz
doriz