O

Obi_110

Active Member

• Aug 16, 2023

• #1

Afternoon,

I only have a defender haynes manual, but have a disco 200tdi in my 110 - are the torque settings the same for the disco 200tdi? Or if they're different, please can someone advise.

Also, any recommendations on gauges to measure the 60 degree turn after ft/l, I have a cheapy from amazon that I used on a friend's 300tdi, but I wasn't 100% convinced with it

Thanks again

 

H

Hicap phill

Well-Known Member

• Aug 16, 2023

• #2

I think the head torque setting would be the same between LR & disco. Engines are the same except the turbos mounting.

@resto_d1 I know your doing some disco engine works, you got any figure for the bolts?
Thanks

 

R

resto_d1

Well-Known Member

• Aug 16, 2023

• #3

What are we talking? Headbolts? Laser do a good dial gauge attachment. You want a stubby socket for the back right bolt (if we talking headbolts) as you can’t fit an impact in

 

Flossie

Well-Known Member

• Aug 16, 2023

• #4

Rotate 1 flat of the head of the bolt =60 degs.

 

O

Obi_110

Active Member

• Aug 17, 2023

• #5

Hicap phill said:

I think the head torque setting would be the same between LR & disco. Engines are the same except the turbos mounting.

@resto_d1 I know your doing some disco engine works, you got any figure for the bolts?
Thanks

Click to expand...

resto_d1 said:

What are we talking? Headbolts? Laser do a good dial gauge attachment. You want a stubby socket for the back right bolt (if we talking headbolts) as you can’t fit an impact in

Click to expand...

Sorry, should have specified, yes the head bolts - thanks I'll take a look at laser

 

R

resto_d1

Well-Known Member

• Aug 17, 2023

• #6

It’ll be same but I can check if you like