JohnnyCrash

New Member

• Apr 1, 2014

• #1

anyone have the dimensions for this tool??

 

wammers

No longer with us, RIP

Donater

• Apr 1, 2014

• #2

I have one just fits over the pump drive and engages on the woodruff key to turn pump. Nothing special. ALWAYS turn pump in a clockwise direction.

 

JohnnyCrash

New Member

• Apr 1, 2014

• #3

wammers said:

I have one just fits over the pump drive and engages on the woodruff key to turn pump. Nothing special. ALWAYS turn pump in a clockwise direction.

Click to expand...

what's the ID? and thickness of the gap for woodruff? rest is just a bar welded on

 

wammers

No longer with us, RIP

Donater

• Apr 1, 2014

• #4

JohnnyCrash said:

what's the ID? and thickness of the gap for woodruff? rest is just a bar welded on

Click to expand...

Will go and dig it out and measure it for you. Sometimes you are a bloody nuisance.

 

JohnnyCrash

New Member

• Apr 1, 2014

• #5

wammers said:

Will go and dig it out and measure it for you. Sometimes you are a bloody nuisance.

Click to expand...

better than gripping the shaft with mole grips and then moaning on here it no longer fits

 

wammers

No longer with us, RIP

Donater

• Apr 1, 2014

• #6

Ok tool is 180 mm long. Boss is 25 mm OD. 20 mm long. Major ID at nose of boss is 16.5 mm. Minor ID at heel of boss is 12.75 giving the taper over the 20 mm to fit the taper on the pump drive. Woodruff key slot is 3.4 mm wide.

 

JohnnyCrash

New Member

• Apr 1, 2014

• #7

wammers said:

Ok tool is 180 mm long. Boss is 25 mm OD. 20 mm long. Major ID at nose of boss is 16.5 mm. Minor ID at heel of boss is 12.75 giving the taper over the 20 mm to fit the taper on the pump drive. Woodruff key slot is 3.4 mm wide.

Click to expand...

Fantastic

Thank you

 

wammers

No longer with us, RIP

Donater

• Apr 1, 2014

• #8

JohnnyCrash said:

Fantastic

Thank you

Click to expand...

No problem.

 

JohnnyCrash

New Member

• Apr 2, 2014

• #9

that's the end made now to have a rummage through the scrap bin for something I can weld on as a handle

 

wammers

No longer with us, RIP

Donater

• Apr 2, 2014

• #10

JohnnyCrash said:

that's the end made now to have a rummage through the scrap bin for something I can weld on as a handle

Click to expand...

On mine the boss is shouldered at the minor ID end to 20 mm OD, the thickness of the handle. Fitted through a hole in the handle which is then welded to handle at 25 mm Dia side with keyway slot along length of handle.

 

Last edited: Apr 2, 2014