m1hgv

m1hgv

Member
hello chaps and chapesse's
i have been reading for a while now in all the rebuild freds
and thought hmm i could do that al do mine then :cool: no probs so far , got mi toffee ammer out an a srewdriver and started to survey the situation:eek::eek::eek: turns out somone had been in there before me,:mad: so mi pics are in no order but av a butchers anyway im tempted to bin it an buy a fender :eek:::behindsofa: but swmbo sez i gotta fix it cos its comfy any advice or ideas welcome, i have a mig arc loads a tools an no garage but lets face it landrovers tend to wait till there out of the garage before they break so may aswell get used to it ehh:scratching_chin
20130920_104237_zps08b85460.jpg
[IMGhttp://s1365.photobucket.com/user/m1hgv/media/disco%20rebuild/20130922_121119_zps7b6a270f.jpg.html]
20130922_121119_zps7b6a270f.jpg
[/URL]
 
Last edited:
Cheers russ81 think i have sorted now will put all the pics up after cos on my phone at min cheers
 
Holding a disco up with a jack on top of a pile of bricks:eek::eek::eek:
Don't think you will be around long enough to finish it,
 
livers said:
Holding a disco up with a jack on top of a pile of bricks:eek::eek::eek:
Don't think you will be around long enough to finish it,
Click to expand...

nooooooooooo:eek: bin there dun that its just to keep the back from twisting i already came out second best to the mondeo in may 3 screws in elbow joint and a plate and 6 bolts in radius cos i forgot the hand brake although i had chocked the wheels but not enuff :hurt:
 
Don't be disheartened, use it as a chance to future proof the disco, box section sills aren't difficult to do and very nice job when done, haven't done my boot floor but its due next year it's in bad shape. Think ill get a floor shape folded up and make it match onto the arches and inner quarter panels when I get there.


LONG LIVE THE DISCOS!!!!!!
 
G223 said:
Don't be disheartened, use it as a chance to future proof the disco, box section sills aren't difficult to do and very nice job when done, haven't done my boot floor but its due next year it's in bad shape. Think ill get a floor shape folded up and make it match onto the arches and inner quarter panels when I get there.


LONG LIVE THE DISCOS!!!!!!
Click to expand...

thanks for the encouragement but im just hoping that my talent holds up to the task



i think not lol
 
Just take your time and enjoy it. It's supposed to be a bit of fun, right?
If it stops being fun, down spanners and do something else for a bit.

Don't be a tit like me and try and do the whole lot in 4 weeks. It stops being fun quite quickly if you do that!
 
haha yes its supposed to be fun and it is i have done stuff like this before in mi yoof, i have had minis and an all agro so used to a challenge lol, and yes doc pigieon **** it is but its solid the way its blown through aswell i fink its been stick welded may be wrong tho they just patched over stuff in stead of cuttin the rot out but its mi own fault should of looked better i , i knew the floor was shagged but as for the rest i saw the patches on the under side cos its been patched bothe sides of the rot:eek:and the part i could see didnt seem to bad :confused:
ok i cant hide i bought a pup lol
 
hello all
so did a little bit more this afternoon, whilst sorting my order for numerous panels from yrm i thought i clean up the back end of the chassis and see what needs doing,i started by droping the fuel tank after having sprayed all bolts in wd40 every day for over a week i still sheared of the four bolts lol, removed the rear ploughing attachment and attacked the chassis with the wirebrush wheel
ye ye i heard heres the pics

so it looks like i have a bit on the chassis to do as well:dance:lol
suggestions are welcome for the chassis crossmember do i cut it out and replace with box section or patch it all round bearing in mind the whole under side of the cross member fell of when i took tank out:confused:
thanks for looking
Martin
 
There's always more to it than what you can see.
Chop all the crap out and see what your left with and make a decision from there. Chances are it'll be a whole new section.
Or, alternatively, I think there's someone on here flogging a disco galvanised chassis for not an awful lot of beer tokens?
 
Its all doable, but thats a hell of a lot of work. If your welding is OK now, you'll be an artisan by the time you've finished :D

Really admire you if you do continue, to be honest I'd consider breaking it and getting another with less rot. I'm assuming the mechanicals are all A1? If you have work to do there as well, then its a no brainer to me - walk away - it'll cost a packet to do and take years.
 
You must log in or register to reply here.

Similar threads

P
RR Sport L494 - Hybrid Cooling fault after engine rebuild
Replies
10
Views
2K
lynall
L
roule
OIl pump priming issue
Replies
11
Views
1K
roule
roule
B
Advice on Leaky Swivels
2
Replies
36
Views
3K
bendisco
B
R
Upgraded stereo not working
Replies
4
Views
414
Atomician
Atomician
S
Where are all my gears?
Replies
4
Views
505
Dopey
Dopey