mrsnoops
New Member
Hi all, with the cold weather coming i thought i would check the coolant on a disco i bought a few months back, i have ended up draining the system as the coolant strength was low. The coolant coming out was rust coloured so i have flushed the system several times,the problems started when i tried to remove the plastic filler on the thermostat housing. It was siezed solid, it eventually snapped dropping pieces into the housing. Not a problem just removed the thermostat & retrieve the offending items, as i did this i dislodged a piece still in the housing & it fell into the head gallery, off with the housing & retrieve the little bleeder. I just need to ask two things, 1. is there an alternative to the plastic plug/filler on the thermostat housing, 2. ther is a drain in the cylinder block, can anybody tell me where it is.
Thanks Snoops
Thanks Snoops