Stormintrooper

Active Member

• Sep 13, 2016

• #1

So this happened today

How screwed am I?
Iv got a new heater valve. But I cannot seem to find the bypass or the adapter for the valve

Help!

 

Blackburn

Well-Known Member

• Sep 13, 2016

• #2

One on ebay
http://www.ebay.co.uk/itm/LANDROVER...108380?hash=item1c5cdd8f9c:g:N4sAAOSwLzdWSuvu

 

H

honolulujoe

Well-Known Member

• Sep 13, 2016

• #3

thought things like that only happened to me, hope you get it sorted

 

W

Webley1991

Well-Known Member

• Sep 13, 2016

• #4

The adapter is only a piece of turned hexagon bar.

Removing the broken heater valve thread may be possible with a screw extractor. I frequently have to remove broken hydraulic fittings around that size at work.

I got rid of my heater valve completely. I fitted a 90 degree pipe elbow in its place. Maybe this could be an option for you?

 

LordOWar

Well-Known Member

• Sep 13, 2016

• #5

Or there is this one http://www.ebay.co.uk/itm/LAND-ROVE...+Rover&hash=item4651cf0bad:g:ItIAAOSw~gRVtodR

If you ave a dremel or similar you could carefully grind the broken bit just till you get to the thread, then the remains will probably come out easy due to heat and vibration.

 

Stormintrooper

Active Member

• Sep 13, 2016

• #6

Trouble is I can't seem to undo it from the housing. Even after using a blow torch the hex piece wouldn't have it at all so I'm probably better off replacing that too

 

Bobsticle

De Villes Advocaat

• Sep 13, 2016

• #7

The heater valve has always been a completely redundant part if you think about it.
If hot coolant flowed round the heater matrix for eternity you wont get any warmth through to the cab unless you switch the fan on.
Not only have I removed the operating cable and cab control slide, I have the valve in the open position year round.