danchapman2k2
Well-Known Member
My birthday today and and I wake up and what do I get!! A SNORKEL!!
Wel chuffed!!
Wel chuffed!!
Stuballsed
New Member
Nice one. I recommend you now go and buy a couple of tubes of silicone sealant and extend your axle/gbox/tbox breathers.
Speaking from experience, even if you don't intend to go in that deep, deep can kind of happen:doh:. Just in the process of stripping out my snorkel and engine bay connections and replacing with single air hose from snokel to air box, and refitting with more silicone than Jordan
danchapman2k2
Well-Known Member
What do you guys use just normal bathroom clear silicon? Well I need to block up the hole on air filter the drain hole at the bottom and I need some sort of sealant I can remove to change airfiter - any recommendations?
And I sent the link of what I was looking at a while go then other things come up and never got it in the mean time she had already brought! And no she's not allowed to touch it as it would make my landrover explode if she did
And I sent the link of what I was looking at a while go then other things come up and never got it in the mean time she had already brought! And no she's not allowed to touch it as it would make my landrover explode if she did
danchapman2k2
Well-Known Member
What you use that for the air filter? Will have to look into all this
ya dont need airfilter
silicone seal any hose snorkel connection , then let it dry 24hrs
DJ Xan
Active Member
Used it on all the joins to make it water proof.
danchapman2k2
Well-Known Member
How comes don't use an air filter.
Sorry to sound stupid but I read everywhere that use airfiter buy your saying by pass air filter straight from snorkel to engine inlet?
Sorry to sound stupid but I read everywhere that use airfiter buy your saying by pass air filter straight from snorkel to engine inlet?
Dr_evil
Banned
You use a bloody air filter :doh: its inline with the snorkel :doh::doh::doh:
the existing air filter is retained - all a snorkel does is to raise the air intake height
danchapman2k2
Well-Known Member
Ok your talking to a guy who's a muppe with this! So I assume I just seal the drain hole of the air filter then? Or am I missing something and there's a filter in the snorkel? At the mo the filter is at the front and did wonder how you seal it fully as the clips at the bottom I couldn't Imagen seal enough
danchapman2k2
Well-Known Member
Just seen u re commented! That's what I thought but if I sealant the airfiter housing I will never get it back out to change filter! So what do you do reference the filter casing?
