J

johnnyboy01

New Member

• Dec 20, 2008

• #1

But my heated seat don't heat-up . Does anyone have any ideas what could cause this problem?

Thanks

John

 

clutchdust

Well-Known Member

• Dec 20, 2008

• #2

if its a p38 then its more than likely the elements have burnt out. check to make sure you have power and earth to the elements, if so then you'll need to replace them. Not for the faint hearted!

 

G

gavbriggs

Well-Known Member

• Dec 20, 2008

• #3

the job is simple, its usually broken where the 'rib' in on the seat base, there is a guide on Heated Seat Repair Operations

2 mins to fix with crimp fittings, also route the element to the side a little to avoid it in future, it will take a bit of fiddling to get to it but i have done it and it works fine!!!!!

 

goonarmy

Beer tester

LZIR Despatch Agent

• Dec 20, 2008

• #4

if yer heater works i wouldnt bother!

 

tufty

New Member

• Dec 20, 2008

• #5

easy option . get the missus to sit in the drivers seat for 5 mins while you have a cup of tea. voilla !!! warm seat.

 

rob evans

Active Member

• Dec 20, 2008

• #6

Mine was the same both sides when i had it .the switches lit up but no heat.both pads had gone..they work ok now,but p38 seats dont get that hot not like the RR3.