D

dwabbit

New Member

• Dec 18, 2013

• #1

i want to test power up my winch. At moment I don't have a solenoid fitted waiting for it to be delivered.
its a superwinch EPi9000 motor has Ground,F1,F2,A connections. which connections would i need to connect to battery to spin it up.

 

Bump

Well-Known Member

Events Planner

• Dec 18, 2013

• #2

I believe, from what i've read and what i understand of winch motors...

Connect F2 to A and to Earth. Connect +12v to F1 for one direction

Connect F1 to A and to Earth. Connect +12v to F2 for the other direction

(NOTE: do not think you can just connect the other F terminal to earth and skip A, this could end badly, you must connect the other F terminal to A and then to earth... I can explain why if you would like)

 

D

dwabbit

New Member

• Dec 18, 2013

• #3

cheers for that

 

warrior

Well-Known Member

• Dec 18, 2013

• #4

Connect earth to the ground bolt, link a and f1 and the positive to f2 (it will spark) that will rotate 1 way the fir the other link a and f2 and positive to f1,

 

Bump

Well-Known Member

Events Planner

• Dec 19, 2013

• #5

warrior said:

Connect earth to the ground bolt, link a and f1 and the positive to f2 (it will spark) that will rotate 1 way the fir the other link a and f2 and positive to f1,

Click to expand...

isn't that what i said

 

warrior

Well-Known Member

• Dec 19, 2013

• #6

Bump said:

isn't that what i said

Click to expand...

You send link a and f1 to earth.