tom1979

tom1979

Well-Known Member
Full Member
evening all, I bought the TF255 heavy duty steering rods for my D2 to find that the standard bolts for fixing the steering damper aren’t long enough to protrude to or past the nylock part, and new bolts weren’t supplied with the kit.

http://www.terrafirma4x4.com/mobile/productgroup.php?qsec=19&secname=Steering Rods&catname=Reinforced Steering Rods&catId=77&grpname=Discovery 2 Steering Rods&grp=156

The place I bought them from contacted Allmakes who then sent me some bolts (I’d asked for longer/correct bolts) however what they sent was standard (short) bolts.

I contacted Allmakes directly to be told:
“Unfortunately we do not have a TF255 to replicate the issue that you have, and we hoped that supplying the bolts would have solved the issue that you.

We have not heard from any other customers regarding this issue.

Are you able to obtain the correct bolts as suggested below?”

Has anyone else noticed this when fitting these steering rods/dampers, which I presume are reasonably popular?
 
Hicap phill said:
Probably the 2 u bolts for the steering damper attachments
Click to expand...

You get bolts with that. It’s the bolts for the steering damper. And it was lucky I had a terrafirma steering damper as the standard steering damper is too small
 
I mean these bolts, nothing to do with u bolts???? The ones that attach the steering damper, where there is no mention you have to use terrafirma steering dampers and longer bolts than these

F69B99EA-AF29-4564-AB0F-B9E46E5C3AAC.jpeg
 
Grem said:
Stop being a fanny and just buy some M10/12 high tensile bolts of whatever length you need?
Click to expand...

Lol you could get a job at Allmakes with that attitude. Or you could randomly post on the internet! I asked for opinions/experiences of people who had bought that kit not a forensic examination of what the kit includes or ideas about what I could do about. I know I can buy two bolts, presumably you don’t have these steering bars/damper fitted either.

The point is, they should be supplied
 
Was it sold to you with bolts? Does it promise you you’ll have everything you need? Did it give you sockets to fit it?
 
Grem said:
Was it sold to you with bolts? Does it promise you you’ll have everything you need? Did it give you sockets to fit it?
Click to expand...

What a dick yeah and i thought someone would come along and fit it too what a disappointment that was lol
 
It just struck me that quite a lot of contact with the company about your standard bolts being too short was a bit excessive.

Personally I’d have just cursed them, and then sorted out the problem myself
 
Grem said:
It just struck me that quite a lot of contact with the company about your standard bolts being too short was a bit excessive.

Personally I’d have just cursed them, and then sorted out the problem myself
Click to expand...

One email and one reply can hardly be seen as excessive.

Yes I will just get some bolts but for all I knew they may well have come with bolts normally, there was no mention of the standard steering damper or it’s bolts not fitting with the kit so I’d assumed it came with bolts or that it was a direct replacement.

I wondered if anyone else who had bought the kit had had the same, but everyone that replied didn’t even have those steering bars but had an opinion anyway.

Cheers
 
You must log in or register to reply here.

Similar threads

Mph007365
1999 P38A 2.5D WHAT IVE DONE, WOULD I DO IT AGAIN?
Replies
4
Views
1K
Salisbury Nick
Salisbury Nick
F
Lightweight with Essex V6 re-build
Replies
3
Views
859
suds63
suds63
Nardo90
200 TDI engine rebuilt and collected!!!!!!!!!!!!!!!! (plus back story, short version.)
Replies
14
Views
3K
Nardo90
Nardo90
S
Defender Upgrades
Replies
6
Views
2K
South_WestLandy
S
lightning
Terrafirma RTC steering damper
Replies
16
Views
3K
David Davies
David Davies