J

John Browne-Cole

New Member

• Jul 23, 2017

• #1

Good evening

I have a 1964 series 2a petrol and the temperature gauge doesn't work can some one tell me where the temperature sender is as I though I would start with that.

Thanks

John

 

Blackburn

Well-Known Member

• Jul 25, 2017

• #2

Rear rh side of engine

 

FFG

Active Member

• Jul 26, 2017

• #3

Just run a cable from the sender to the back of the gauge first to see if its not a cable issue. Mine was and traced it to a dodgy connection making an intermittent contact. Replaced the section of cable and all fine now.

 

J

John Browne-Cole

New Member

• Aug 14, 2017

• #4

I have had a look at the back of the gauge this evening and it is not wired in can any one give me instructions on how to do this.

 

J

John S

Well-Known Member

• Aug 15, 2017

• #5

Do you have a wiring diagram?

 

C

Colthebrummie

Well-Known Member

• Aug 15, 2017

• #6

Has the wire simply come off, in which case just put it back on, or has it been taken off, in which case ask yourself why.

Col

 

J

John Browne-Cole

New Member

• Aug 15, 2017

• #7

The gauge has no wires going to it at all the petrol gauge works